After installation, clean the dirt with oil.
Switch on the power & connect the ground line at the same time, and then whether check the rotating direction of motor is correct.
Fasten all nuts & bolts.
Add enough lubricating oil to lubrication system in everywhere, and check whether smooth or not.
Check the machine controlling device to make it flexible and normal.
Install the machine protective cover.
Adjust the clearance between the upper and lower edge of the blades.
To move the big gear with a manual method before testing the machine, close the clutch to run the machine, and adjust the feeding quantity of the main engine and auxiliary engine on transverse & longitudinal directions, then check whether the action with the pressing frame of main engine is coordinated.

Technical parameter:

Expanded metal machine JQ25-200
Working width	3000mm
Material thickness	0.5-6.0mm
Distance of feeding	0-10.0mm
Working speed	39/min
Motor	55KW 220/380v 50Hz
Weight	18000KG
Measurement	4900mm1500mm2800mm(Main machine) 2530mm1680mm700mm(Secondary machine)

Photo of 3m width expanded metal mesh:

Product Tags:

mesh manufacturing machine

cnc steel bending machine

Inquiry Cart 0