Anping Anao Mesh And Metal Products Co., Ltd.
ANPING ANAO MESH AND METAL PRODUCTS CO., LTD.
Add to Cart
Light Type PVC Spraying Steel Expanded Metal Mesh For Plaster Reinforcement
Introduction:
Materials: cold-rolled metal sheet - galvanized or uncoated. If you want to prevent rust stains and corrode, then use galvanized sheet.
Thickness of starting steel sheet: 0.5mm - 1.6mm, can be adjusted depend on properties of the finished plaster mesh.
Opening size (mm): 15 × 7, 20 × 8, 30 × 12, 40 × 16, 45 × 17, 50 × 18.
Roll height: 1.0m - 2.5m
Roll length: 10m, 15m, 20m, 25m, 30m.
Specification details as the following table, the schematic diagram of patter size shown as above picture.
Specification:
| Items | Pattern size (mm) | Width (m) | Length/roll (m) |
|---|---|---|---|
| PMEP-1507A | 15 × 7 × 0.9 × 0.7 | 1.0 - 2.5 | 10, 15 |
| PMEP-1507B | 15 × 7 × 1.0 × 0.7 | 1.0 - 2.5 | 10, 15 |
| PMEP-2008 | 20 × 8 × 0.9 × 0.7 | 1.0 - 2.5 | 10, 15, 20 |
| PMEP-3012 | 30 × 12 × 0.9 × 0.7 | 1.0 - 2.5 | 10, 15, 20, 25 |
| PMEP-4016A | 40 × 16 × 0.9 × 0.7 | 1.0 - 2.5 | 15, 20, 25 |
| PMEP-4016B | 40 × 16 × 1.0 × 0.7 | 1.0 - 2.5 | 15, 20, 25, 30 |
| PMEP-4517A | 45 × 17 × 0.7 × 0.5 | 1.0 - 2.5 | 10, 15, 20, 25, 30 |
| PMEP-4517B | 45 × 17 × 1.2 × 0.7 | 1.0 - 2.5 | 10, 15, 20, 25, 30 |
| PMEP-5018A | 50 × 18 × 0.7 × 0.5 | 1.0 - 2.5 | 10, 20, 25, 30 |
| PMEP-5018B | 50 × 18 × 1.4 × 1.0 | 1.0 - 2.5 | 20, 25, 30 |
Applications:
Expanded metal mesh used in construction as a reinforcing element for plastering and finishing works, as well as the reinforcement reinforcing floors, ceilings and pavements. It protects wall against cracks and fissures due to changes in temperature and humidity, and mechanical stress. The expanded plastering mesh increases the mechanical strength of the reinforced surface, including impact resistance. Installation and operation are very simple.
Photo:
Expanded metal schematic diagram, with pattern size 50 × 18 × 0.7 × 0.5mm
Expanded metal used for plastering to keep the wall surface from cracking.